品牌：RETZ瑞茨/我們一直致力于流體控制領域的持續創新，始于2005……進口二位三通電磁閥為活塞式結構,閥體安裝無方向限制,平衡水平安裝，本產品通常用在各種常溫、中溫、常壓、中壓等場合的純凈氣體、液體、空氣、水、瓦斯、煤氣、油、蒸汽、制冷劑、熱水的管路自動控制The Retz two position three way solenoid valve is a piston type structure, with no directional restrictions on valve body installation and balanced horizontal installation. This product is usually used for automatic control of pure gas, liquid, air, water, gas, gas, oil, steam, refrigerant, hot water pipelines in various normal temperature, medium temperature, normal pressure, medium pressure and other occasions

進口二位三通電磁閥工作原理-Working principle of imported two-position three-way solenoid valve

一進一出One in, one out

常閉式(2/3B)：當線圈通電時，2通向1,1與3關閉。當線圈斷電時，2與1關閉，1通向3 Normally closed (2/3B): When the coil is energized, 2 leads to 1, 1, and 3 close. When the coil is powered off, 2 and 1 close, and 1 leads to 3

常開式(2/3 K)：當線圈通電時，3與1關閉，1通向2.當線圈斷電時，3通向1,1與2關閉 Normally open (2/3 K): When the coil is powered on, 3 and 1 close, 1 leads to 2. When the coil is powered off, 3 leads to 1, 1, and 2 close

一進二出One in, two out

當線圈通電時，1通向2,1與3關閉。當線圈斷電時，1與2關閉，1通向3 When the coil is energized, 1 leads to 2, 1, and 3 close. When the coil is powered off, 1 and 2 close, and 1 leads to 3

二進一出Two in and one out

當線圈通電時，2通向1,3與1關閉。當線圈斷電時，2與1關閉，3通向1 When the coil is energized, 2 leads to 1, 3, and 1 close. When the coil is powered off, 2 and 1 close, and 3 leads to 1

注：二進一出的工作原理的電磁閥兩進口端壓力不相等時，需加止回閥Note: When the pressure at the two inlet ends of the solenoid valve with the working principle of two inputs and one output is not equal, a check valve needs to be added

進口二位三通電磁閥結構特點--

動作響應快，換向和分流迅速

在真空負壓和零壓時都能正常工作

塑封線圈，提高閥的可靠性并能防水、防潮

獨特設計、性能穩定、活塞結構、密封性好

配套線圈，不易燒毀

進口二位三通電磁閥選型參數--

產品規格：1/2-4"

閥體材質：黃銅 、鑄鋼

介質溫度： -40℃ ~+200 ℃

適用壓力：0~10MPa

防護性能：防水、防爆（DⅡCT5、ExdⅡCT5、ExmbⅡCT4、ExdⅡCT4）、防腐。

防護等級：IP67、IP65

閥芯材質: 均為不銹鋼

接線方式：接線座式、引線式、插頭式

控制方式：常開、常閉

電源電壓：DC24~127V；AC36~380V

連接方式：內螺紋、法蘭

適用介質：氣體、水、油品、蒸汽、燃氣、腐蝕性流體等，小于50CSt （大于50時需定制）

泄 漏 量： 零